These products are suitable forthe connection of copper conductors(section1.5-1000mm2 ) in power cable with electronic equiment they are made of withhigher 99.9percent pure copper tubeT2and coated wit··

Double hole copper nose, also known as double hole copper tube nose, is a connector used for connecting wires and cables to electrical equipment. The material is generally made of T2 purple copper, and the appearance of the product is a spatula round head. The top side is fixed with a screw edge, and the end is a stripped copper core for wires and cables. The varieties are divided into oil blocking type and tube pressing type. The oil blocking type is better. In order to resist air oxidation, tin plating is applied to the surface of the copper nose to prevent oxidation and blackening. DT2S double hole copper nose is only used for wires larger than 25 square meters. Double hole copper nose is not used for wires smaller than 25 square meters, and cold pressed wire nose is used instead. There are two types of double hole copper noses: surface tinned and non tinned tube pressure type oil blocking. DT2 copper tin plated terminal block is based on the original DT2 copper terminal block, with a layer of "tin" plated on the surface to enhance the conductivity of the DT2 copper terminal block.